Group Axle Weigher
The LMI low-profile tri-axle weighers consist of two platforms 4 m long and 1 m wide, placed next to each other, which can accommodate up to three truck axles at the same time. This ensures a load measurement accuracy superior to that of portable pads, and comparable to that of a full weighbridge.
The vehicle is weighed one axle group after the other. One must take care that each axle group is weighed separately. After weighing a laden vehicle, by subtracting the recorded empty weight, the instrument calculates and shows the nett weight. Up to 2000 truck registration numbers, together with the relevant empty truck weights can be recorded in the instrument’s memory.
NO INSTALLATION REQUIRED
Differently from a weighbridge, or even a single axle weigher, the low-profile axle weighers require no installation. They are simply placed on the ground (concrete, tar, even compacted soil). They can easily be moved around with a fork lift.
TECHNICAL DATA
| Maximum capacity (ton) |
40 |
| Length of each platform (mm) |
4000 |
| Width “ “ “ (mm) |
1000 |
| Height “ “ “ (mm) |
200 (platform = 80 mm from ground) |
| Weight of each platform (kg) |
850 |
| Smallest reading (kg) |
10 |
READOUT INSTRUMENT
LS2
The readout instrument is equipped with a small tally-roll printer. Alternatively, it can be supplied together with a separate printer. It can be operated with 220V AC or with 12 V DC. It can also be connected to a PC for file storage and reporting.
|
